|
|
Post by Topsey on Oct 10, 2013 20:39:38 GMT
Well if Kevin can do a thread about his build then i think i should too  The Frame: 2013 Autum Razzia, I know i posted the Spec's in another Thread, but i will post everything new in here! 74.5 Degree Head Tube Angle 19.3" Top Tube Length 73 Degree Seat Tube Angle 7" Stand Over Height 11.8" BB Height 12.4" Slammed Chain Stays The two main features i feel need to be pointed out are the Laser Etched Logos & the Integrated Chain Tensioners that go THROUGH the Drop Outs! (Quality Idea that!) Frame Overview:  115mm Hour Glass Integrated Head Tube WITH Laser Etched Autum A Logo!  Head Tube Side View - Shout Outs to Dephect Clothing & Quest BMX!  Lazer Etched Autum Logo on the Top Tube...  Horizontal AND Vertical Cut Seat Tube with a sexy little Curved Seat Stay Bridge!  Externally Machined Bottom Bracket & a Quality little Autum Sticker that you have to cut out yourself!  Custom 14mm Drop Outs with Integrated Chain Tensioners (Heaven Sent Feature LoL!)  That's the Frame sorted! Hold tight for some Parts pictures! |
|
|
|
Post by Topsey on Oct 10, 2013 20:51:57 GMT
Next up the Crankset! The Sprocket will be changing but that ones a secret till it arrives at my door!  Flatware Rhode Island 22t Socket Drive Sprocket (For now) Flatware Twombolt 160mm Socket Drive Crankset, Blue6 Titanium Spindle Bolt & Odyssey Twisted PC Pedals.  Backside of the Cranks & Sprocket & a picture of the rather lovely Blue6 Titanium Spindle Bolt!  The BEST Pegs in Flatland right now! Quest BMX MetaGuruStixs! If you want a set for your Flat Bike, Hit the link in my Signature & buy yourself a set!  Another view of the wonderful Quest BMX MetaGuruStix! This time you can see that the one laying down is drilled for 14mm! Danny the owner of Quest who has become a close friend since our introduction, was awesome & drilled me a pair out to 14mm to run with my Planned 14mm Freecoaster!  |
|
|
|
Post by soulrebel on Oct 10, 2013 21:50:03 GMT
SUPERGOOD !!!
looking forward to seeing this thing built up in all its glory.
|
|
|
|
Post by getzfafive on Oct 11, 2013 0:14:48 GMT
Dope!! I think thats the first time I've seen a blue6 Ti bolt used with those cranks before. I need to order those same pegs.
|
|
|
|
Post by biggybuggy on Oct 11, 2013 0:41:26 GMT
Man, flatland is growing even more on me.
|
|
|
|
Post by Topsey on Oct 11, 2013 1:32:00 GMT
Dope!! I think thats the first time I've seen a blue6 Ti bolt used with those cranks before. I need to order those same pegs. DO IT!! Seriously they ARE the BEST Pegs in BMX right now! Danny went through shit loads of Knurling Prototypes (Mad to think i know!) This Knurling is exclusive to Quest BMX Pegs, honestly it feels really good in your hands & I am certain they will grip like crazy! They are awesome, 6061 instead of 7075 for a more durable Peg, They are THICK at each end to support the Axle & at the business end to last longer than the competitors! You need to get new Pegs for your Lash, GET THESE!!  |
|
|
|
Post by Topsey on Oct 12, 2013 13:33:59 GMT
Some new goodies to add to the Thread! I've had the Zodiac Headset Cap for about a year now, Carbon Fibre Head Tube Spacer about 6 months & the Autum Forks arrived THIS morning!  Custom Zodiac Eng Headset Dust Cap, 15mm Stack Height, Chamfered Edges & Hand Polished, with a 5mm Carbon Fibre Head Tube Spacer.  Fork Overview...  Lazer Etched Autum A & Removable Brake Mounts  Lazer Etched Autum A & Angled 3/8ths Drop Outs - Zero Offset of course!  Recessed Compression Bolt! with Laser Etched Autum Logos! |
|
|
|
Post by cantbancollin on Oct 13, 2013 2:07:40 GMT
I'm getting so effin stoked on this build
|
|
|
|
Post by biggybuggy on Oct 13, 2013 2:11:10 GMT
Awwe ma gawd, the forks, the cranks, sprocket, frame. Bikegasm.
|
|
Zach
Junior Member
Posts: 193 
|
Post by Zach on Oct 13, 2013 10:28:46 GMT
You do realize that when I eventually come and visit I WILL WANT to ride this beauty lol.
|
|
|
|
Post by Topsey on Oct 13, 2013 13:30:28 GMT
@collin.. BIG things will be happening at the end of the month! Couple of weeks after that & i will have a mahussive update! @biggy.. Hell yeah Bikegasm! This Bike is gunna be the SEX! Zach.. Of course! You are totally welcome to give her a try! Depending on when you're down there could be some SERIOUS updates! |
|
Zach
Junior Member
Posts: 193
|
Post by Zach on Oct 13, 2013 13:35:03 GMT
YAY. may be be able to get down early 2015 after i have passed my test
|
|
|
|
Post by Topsey on Oct 15, 2013 18:26:54 GMT
UPDATED: As promised! Better pictures of the Blue6 Titanium Hex Head 3/8ths x 16TPI Bolts for my upcoming Profile Elite Front Hub  |
|
|
|
Post by rageman on Oct 15, 2013 18:36:03 GMT
Your bike is coming together really well dude
|
|
|
|
Post by Topsey on Oct 16, 2013 1:12:45 GMT
Cheers Patrick, Deposit goes down tomorrow for the rest of the Parts!
|
|
|
|
Post by Topsey on Oct 17, 2013 13:58:00 GMT
|
|
|
|
Post by getzfafive on Oct 17, 2013 17:37:22 GMT
That loin sticker looks pretty cool. I cut about 10mm off the top of my Autum bent fork.
|
|
|
|
Post by Topsey on Oct 17, 2013 19:27:05 GMT
Yeah looking like 10-12mm will have to come off mine!
|
|
|
|
Post by eddiimundo on Oct 21, 2013 10:16:15 GMT
looking good my man! btw, you've put 74'5 ht angle and 73.... im guessing its menna be 73 st angle? I cant wait till all my shit comes for my bike,got my cranks, getting my bars soon, cult match fc when its releaased, finally getting my hands on a red sunday knox sprocket (I think) and then some Baskett pegs I think when i get payed. maybe a new seat, then shes done
|
|
|
|
Post by Topsey on Oct 21, 2013 14:02:53 GMT
Nice one for spotting the Seat Angle thing Eddii! I cannot wait to get this beauty built! This Frame & Fork are a bit of an experiment, I have a very good idea of the geometry i like & this isn't a great deal different, just enough to make the Bike feel slightly different. Then it has Removable Mounts Front & Back, That's also a bit of an experiment for me, i guess that when i get riding i can decided if i want any Brakes at all & then adjust the Bike accordingly!
|
|
|
|
Post by eddiimundo on Oct 21, 2013 14:18:15 GMT
Nice one for spotting the Seat Angle thing Eddii! I cannot wait to get this beauty built! This Frame & Fork are a bit of an experiment, I have a very good idea of the geometry i like & this isn't a great deal different, just enough to make the Bike feel slightly different. Then it has Removable Mounts Front & Back, That's also a bit of an experiment for me, i guess that when i get riding i can decided if i want any Brakes at all & then adjust the Bike accordingly! no worries bud think me and you have a pretty similar preference on geomatry... short and snappy, but not super lover like the hangover or similar park frames. and I seriously want to mess about on a bike with front brakes, cant get them on my bike and not sure if id want them there always, front brakes just look so fun to mess about on, like being a kid and doing little stoppies all the time haha |
|
|
|
Post by Topsey on Nov 13, 2013 17:35:21 GMT
|
|
|
|
Post by biggybuggy on Nov 13, 2013 23:35:56 GMT
Fuck you. This is torture.
|
|
|
|
Post by Topsey on Nov 14, 2013 2:30:52 GMT
Whoops! Forgot to upload the Bloody Photos hahahahaha! My Bad! Well the Bike Check First.... Frame:Autum Razzia 19.3" with Removable Mounts & Custom 14mm Drop Outs Front End:Autum Zero Fork with Removable Mounts (Steerer Tube Cut to 160mm) FSA Impact Pro Integrated Headset Bearings Zodiac Eng Custom 15mm Headset Dust Cap 2mm or 3mm Carbon Fiber Head Tube Spacer Madera Mast 36mm Top Load Stem with Ti Bolts (I have been told this is the ONLY Polished Version of this Stem in this Size in existence right now!) Quest BMX Miyagi 8.75" Handle Bars Grips & Bar Ends:ODI Lock Jaw Grip Locks Odyssey Cufflink Flangeless Grips ODI Lock Jaw Grip Locks Odyssey Par Ends Pair Seating:Odyssey Veteran Railed Seat Thomson Elite Railed Seat Post 300mm or 330mm (Can't remember which size i ordered lol!) Odyssey Mr Clampy Too Seat Clamp Drive Train:Odyssey Bluebird Chain (Not Installed Yet, See Below) Flatware Rhode Island 22t Socket Drive Sprocket (Being replaced with something EXTRA special SOON!) Flatware Twombolt 160mm Socket Drive Crankset with Blue6 Titanium Bolt Profile Column 22mm Spanish Bottom Bracket Kit (Bastardized to fit the Fucking Frame/Cranks  I'll explain in a second!) Odyssey Twisted P.C Pedals EDIT: The Autum B.B Shell is NOT narrower than "Normal" It actually turns out that the Profile Cone Spacer is LONGER than the "Normal" Mid or Spanish B.Bs available right now! They are made using American B.B Specs! I know they aren't a great deal of money to produce BUT... Mine was Ano Red with Profile Racing & 22mm Spanish Machined into it! So they waste the little money it takes to Produce it & more importantly someones TIME to do them all, only to have the purchaser just toss it aside & use a different one?  BUT.. The Flatware Cranks DO have a shorter Spindle than "Normal/Average" So the B.B Cones DO NOT FIT  The B.B Cones are LUSH! & I cannot use one!!! I took the Drive Side Cone & put it on the Non Drive Side & then i had to rummage through my spares box to find a SUPER narrow Cone Washer for my Drive Side! ANNOYED haha. Front Wheel:Primo E-Comet 1.95" Kevlar Folding Tyre (Doesn't inflate to that size though) Schrader Valver Inner Tube Odyssey Rim Strip G-Sport Birdcage 36h Rim (Removed the Gigantic G-Sport Stickers from them though!) Profile Elite 36h 3/8ths Front Hub Odyssey HGS Butted Spokes x 36 Blue6 Titanium 3/8ths x 16TPI Hex Head Bolts x 2 Quest BMX MetaGuruStix 3/8ths Peg Pair Rear Wheel:Primo E-Comet 1.95" Kevlar Folding Tyre (Same as above ^^) Schrader Valve Inner Tube Odyssey Rim Strip G-Sport Birdcage 36h Rim (Again same as above ^^) Ezra Convertible 36h 9t RHD 14mm Male Freecoaster Hub Odyssey HGS Butted Spokes x 36 Quest BMX MetaGuruStix Custom 14mm Peg Pair The dodgy Seat angle has been fixed & as you can tell from the Parts list i have made a couple of minor changes to the Bikes looks lol. Pictures in my next post |
|
|
|
Post by Topsey on Nov 14, 2013 2:34:16 GMT
|
|
|
|
Post by biggybuggy on Nov 14, 2013 3:08:55 GMT
You made me jizz, in, my pants.
|
|
|
|
Post by teemorrison on Nov 19, 2013 0:34:46 GMT
Damn dude! That thing is awesome.
|
|
I'll explain in a second!)
BUT.. The Flatware Cranks DO have a shorter Spindle than "Normal/Average" So the B.B Cones DO NOT FIT 
The B.B Cones are LUSH! & I cannot use one!!! I took the Drive Side Cone & put it on the Non Drive Side & then i had to rummage through my spares box to find a SUPER narrow Cone Washer for my Drive Side! ANNOYED haha.
